Gray lenses are very comfortable when you’re in sunlight for extended periods. Gray is the perfect neutral that blocks excess blue light and lets you see truer colors than other lens shades. We then have to press the keypad button a second time for the shades to actually move up.Īny thoughts? Anyone have a similar system to try and report back? You don't need Lutron keypads, just the Lutron app to check this out. Gray lenses are an all-around good choice for sunglasses. Since Lutron is not seeing them at 0%, if I use my Lutron wall keypads to then open the shades, on the first press nothing happens and instead it then "registers" the 0% level, and the Lutron "closed" feedback LED, and the Lutron app, will both then respond with current 0% status. This doesn't sound like a huge issue, but in reality it's a pain. But if I then attempt to close the shade all the way to 0% from C4, the shade will in fact close all the way down, but the level of 0% is not being recognized by the Lutron app, and instead still shows the 10% level that was set previously. If I use the slider in the C4 GUI to change to say 10%, the shade moves as expected, and within both C4 and Lutron apps, the level shows correctly at 10%. I know that description is hard to follow, but an example would be the shade is sitting at 50%. This issue is when using any of the C4 navigators to close any shade to 0% (fully closed), the Lutron system is not seeing the final feedback at 0%, and instead just continues to see the level set to whatever the previous level was set to. Or maybe got introduced by a recent C4 update? Not sure. And it's possible this problem has always existed, but I'm not sure as perhaps I just never noticed before. This time, it's not just an issue with the Neeo, but across all navigators.
Major mechanical problems will be quoted after evaluation. Web Info: The standard price covers most encoder electrical repairs. Manufacturer Part Number: SST-11-H2-B06Z. I'm sorry to report I'm seeing yet another issue with my Lutron Triathlon shades. Category: Encoders / Tachometers / Resolvers. Maybe something wrong with my setup only? Anyone else have similar Lutron shades to test this out? I have not contacted my remote dealer yet, but since the NEEO is normally stuck in my dedicated theater (without any shades) it's not a huge deal right now, but someday I may replace my upstairs remotes with NEEOs. First issue is button icons are completely confusing, as the arrows show left/right instead of up/down, which would be intuitive for shades, right? And then once the shade starts moving (either up or down) the stop button in the middle becomes inactive, and I can't stop the shade from going all the way up or down. Or like the sliders for lights on the NEEO, which seems to work pretty well.īut even with the buttons, things are not quite right. I was thinking these should be sliders instead of 3 discrete buttons, similar to how the shades are controlled from the iPad or iPhone app. I switched the room to the dining room as a test, and sure enough the shades button showed up, and the two window shades show up with buttons to open/close/stop. I just brought my NEEO remote up from the theater and wanted to try controlling my Lutron Radio RA2 shades with it.